Fluid Coils

Product Overview

From cooling your heels to warming your tootsies, RAE Fluid Coils can meet the most demanding needs. Since 1989, we have been a leader in the replacement coil market and pride ourselves in building products to meet the customer’s requirements!

Whether it’s chilled water, hot water, or a glycol coil application, RAE Coils can provide you with on-time selections and drawings for any application.

Product Literature

Product Details


    • 3/8” O.D. X .032” copper tube wall thickness tube
    • 5/8” O.D. X .020” copper tube wall thickness
    • 1/2” O.D. X .017” copper tube wall thickness
    • Tempered aluminum, die-formed plate fins available in a corrugated surface or a flat surface with a waffle edge and extruded fin collars
    • 16-gauge, G-90 galvanized sheet steel casing
    • Depths of up to 12 rows with a single fin pack
    • Depths of up to 24 rows with a split fin design
    • Heights up to 52-1/2” in a single fin
    • Fin spacing ranges from 4 FPI to 14 FPI
    • Tubes are mechanically expanded into the fins
    • Tube sheets are die-formed and full collared and are full coil depth
    • Connections can be exactly matched to existing coil or piping arrangement
    • Leak-tested in a water tank

    • 5/8” O.D. X .025”, .030”, .035” and .049” copper tube wall thicknesses
    • 1/2” O.D. X .025” and .032” copper tube wall thicknesses
    • 3/8” O.D. X .014”, .016” and .020” copper tube wall thicknesses
    • Copper, acrylic coated plate fins and aluminum (up to .010 fin thickness) fin materials
    • Baked epoxy and phenolic coating or cross-linked acrylic coating for corrosive applications
    • Spray coatings using epoxy and phenolic based materials
    • Split vertical fin coils with factory fabricated casings for special applications
    • Mechanically expanded fin lengths up to 244”
    • Copper, aluminum or stainless steel casings
    • Carbon steel casings and high integrity/low leakage casings for high pressure boxes
    • Casing flanges
    • Insulated casings with drain pans
    • Galvanized steel, stainless steel, aluminum and copper tube sheet materials
    • ODS and MPT connections
    • ANSI flanges
    • Grooved connections
    • Ultra Case tube sheet – an extruded copper tube sheet supported by a stainless steel casing. As a result, the copper tubes are expanded into a copper tube sheet, eliminating dissimilar metals and providing a mating surface that is significantly less abrasive
    • Industrial-duty coils utilizing steel, aluminum or stainless steel tubes
    • Industrial-duty coils utilizing copper, acrylic coated, aluminum, steel or stainless steel fins
    • Mounted expansion valves
    • Installed side port hot gas connections
    • Integrally mounted electric heaters for defrost applications

    • Custom design
    • Custom engineering
    • Unique configurations
    • Special component packages
    • Cased coils
    • Variable configuration design (“flip-flop”) for right or left hand installation

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.